Ultrasonic cleaning machine is widely used in the current society. In order to make good use of this equipment, we must first know the working principle of the cleaning equipment. Let's introduce the working principle of this equipment.

超聲波發生器發出的高頻振蕩信號，發出高頻振蕩信號是由超聲波發生器，通過換能器將高頻振蕩信號進行轉換，轉換之后成高頻機械振蕩，高頻機械振蕩傳播到介質里面，就是傳播到清洗溶劑里面。

The high-frequency oscillation signal sent by the ultrasonic generator is converted into high-frequency mechanical oscillation by the ultrasonic generator through the transducer. The high-frequency mechanical oscillation is transmitted to the medium, that is, to the cleaning solvent.

在清洗液中超聲波疏密相間向前輻射，超聲波清洗機在清洗液中，超聲波在疏密相間的向前輻射，數以萬計的直徑為50-500μm 的微小氣泡由于液體流動產生，在聲場的作用下，存在于液體中的微小氣泡產生振動。在超聲波縱向傳播的負壓區這些氣泡形成、快速的生長。

In the cleaning liquid, the ultrasonic wave radiates forward between the dense and dense phases. When the ultrasonic cleaning machine is in the cleaning liquid, the ultrasonic wave radiates forward between the dense and dense phases, with tens of thousands of diameters of 50-500 μ The micro bubbles of M are produced by the flow of liquid. Under the action of sound field, the micro bubbles existing in the liquid produce vibration. In the negative pressure area of ultrasonic longitudinal propagation, these bubbles form and grow rapidly.

超聲波清洗機正壓區，當達到一定值聲壓時，迅速增加氣泡，突然發生閉合。沖擊波在氣泡閉合時產生，上千個大氣壓在其周圍產生，不溶性污物被破壞，于清洗液中分散，清洗件凈化的目的就達到了。

In the positive pressure area of ultrasonic cleaning machine, when the sound pressure reaches a certain value, bubbles increase rapidly and close suddenly. The shock wave is generated when the bubble is closed, thousands of atmospheres are generated around it, the insoluble dirt is destroyed and dispersed in the cleaning solution, and the purpose of cleaning parts purification is achieved.

單槽式超聲波清洗機

Single tank ultrasonic cleaning machine

超聲波清洗機在使用的過程中，總是不可避免的會出現受損，我們要盡量的避免這樣的情況出現，盡量避免造成損失。

In the process of using the ultrasonic cleaning machine, it is always inevitable that it will be damaged. We should try our best to avoid such a situation and losses.

在超聲波清洗機使用過程中，如果想要減少對產品的損壞，可以選擇合適的頻率，如果頻率比較合適，功率合適，根據清洗的物件調整好合適的功率，這樣是可以很好的減少對產品的損壞的，要選擇比較合適的清洗液溫度，一般使用堿性清洗液，溫度需要控制在75度是比較合適的，當然有些物件對于溫度、清洗劑都是有要求的，我們要適當調整，不能統一水溫，適合這種物件的水溫，并不一定所有的物件都適合。而且根據清洗物件的多少，使用的清洗劑量也是不一樣的。

In the process of using the ultrasonic cleaning machine, if you want to reduce the damage to the product, you can choose the appropriate frequency. If the frequency is appropriate and the power is appropriate, you can adjust the appropriate power according to the cleaned objects, which can well reduce the damage to the product. You should choose the appropriate cleaning solution temperature. Generally, alkaline cleaning solution is used, and the temperature needs to be controlled at 75 degrees, Of course, some objects have requirements for temperature and cleaning agent. We should adjust them appropriately. We can't unify the water temperature. The water temperature suitable for this object is not necessarily suitable for all objects. And according to the number of cleaning objects, the cleaning dose used is also different.

本文的精彩內容由全自動超聲波清洗機提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://m.szoudao.com我們有專門的客服為您解答問題

The wonderful contents of this article are provided by the automatic ultrasonic cleaning machine. There are many wonderful contents on this website. You can click to enter more contents: http://m.szoudao.com We have special customer service to answer your questions